Set Up Design Groups
Turn on adaptive designs for a Meta channel, add a second creative concept and pin ads to it. This guide walks through each step, from the groups grid to publishing.
Updated November 6, 2026
This walkthrough names your Meta channel's designs, so ads can pin them by name instead of by position, and adds a
second creative concept you can switch ads to. Adaptive designs explains the idea.
You need a Meta channel with an Image link field that shows an image. Your designs stay in the channel's draft,
and nothing reaches your live feed until you publish.
1. Turn on adaptive designs#
- On the channel's Settings tab, in the Used for section, turn on the Adaptive designs chip on the Meta
row. This enables the dialog in the next step. Your feed doesn't change yet.
- On the Fields tab, click Adaptive designs in the toolbar. If the button is greyed out, check the chip from
step 1.
- Keep the Design group name
default unless you prefer another name. This is your base group: the designs
your ads show when nothing is pinned. Image link becomes the first design and each Additional image link the
next, in order.
- Read what the dialog points out. If an image field has fallbacks, only its main value carries over, and the dialog
names the field. Rules that use a converted image field are listed by name, because those parts of them stop doing
anything.
- Click Turn on adaptive designs.
If the Adaptive designs chip wasn't on, Renable turns it on now, and adds the Meta destination if needed. That part
applies immediately. The designs wait for Publish.
You can also open the dialog from Enable adaptive designs in the Renable Options panel, or from Open Adaptive
designs in the fields table.
2. Read the grid#
| In the grid | What it is |
|---|
| Columns | Shapes: Square (1:1), Portrait (4:5) and Story (9:16), plus any other shape your designs use, labelled by its pixel size. |
| Rows | Groups. Each group has an image row and a video row. |
| A filled cell | A design at its true shape, with its template and size underneath. |
| An empty cell | A shape the group doesn't cover. Click it to add a design. |
| Add video | What the video row shows until the group has its first video design. |
| The last column | For a shape that isn't in the grid yet. The size you pick becomes a new column. |
| Main column | A base group main design with no shape: a product photo, or a design whose template Renable can't resolve. |
| Also in this group | A second design of a shape the group already covers, or a design whose template or size Renable can't resolve (an archived template, a deleted size). |
The base group is tinted and carries the Default designs badge. It can't be deleted: turning adaptive designs off is
the way back.
3. Add a design group#
A second group is a new creative concept you can switch ads to. Click Add a design group beneath the grid and fill
in three things:
- Group name, such as
black-friday or summer-sale. Ads pin this name, so it can only hold lowercase letters,
numbers and dashes.
- Image template: the Studio template the group's designs start from. Renable creates one design per size the
template has, and the panel on the right lists them before you commit.
- Video template, which is optional: a template that renders video. It creates a video design per size, in the
same group.
Click Add group. As long as your default designs cover the group's shapes, its image designs only appear on ads you
pin to it, so no running ad changes its image. The dialog warns you when they don't (see the table below).
Video reaches further. A group's video designs are the product's videos, so any ad with Dynamic Media on can draw on
them, pinned or not. Add the video template when you're ready for that, not months ahead. See
Run different designs for different campaigns or seasons.
You can add video to an existing group later from the Add video link on its row, then add more cell by cell.
4. Fill a missing shape or change a design#
Each design in a group can use a different template, and changing one leaves the others alone. Both jobs use the same
picker:
- To change a design, hover its cell and click the pencil.
- To add one, click an empty cell in the shape you want.
- To add a shape that isn't a column yet, click the + in the last column of the image row or the video row.
The picker only offers sizes of that column's shape, and labels the current one In use. If no template has the shape,
add the size in Studio. A design whose template or size can't be resolved has to be fixed in Studio first. Video designs
use the same picker.
A design's name doesn't change when you change its template, because ads pin that name. Over time a name can stop
describing what the design shows. The picker shows the current name under Ads pin this design as.
5. Set surface marks on your default designs#
A surface mark tells Meta to prefer a design on Instagram, Stories or Reels when the ad adapts to placement. Open the
picker on an image design in the Default designs group and turn on a chip under Preferred for: Instagram,
Stories or Reels. The chip then shows on the design's cell.
- A surface mark applies to every ad on the channel, so only default designs carry one. This comes from our own testing
in ad previews, not live delivery, and Meta doesn't document it. See
Instagram, Stories and Reels. On any other group the chips
appear only if a surface mark is already there, so you can turn it off.
- Stories and Reels are only offered on a Story-shaped design, because Meta only selects an image with a surface
mark if it really is 9:16. Build two 9:16 sizes in Studio if you can, since Stories and Reels have different safe zones.
- Instagram is offered on every default image design.
- Video designs have no Preferred for row. Meta matches a video's shape from the file.
Two designs of one shape with different surface marks sit side by side in the same cell. Two with the same surface mark,
or none, don't stack: the second moves to Also in this group.
The dashed 4:5 auto and 9:16 auto chips are added automatically from the design's size.
6. Publish#
Close the dialog and press Publish on the channel. That puts the designs in your live feed. Until Meta fetches the
updated feed, they aren't in Meta's copy of your catalog. The Renable Options panel calls out a design in that state,
and shows when Meta last fetched.
7. Pin an ad to a group#
Open a catalog ad in Meta Ads Manager with the Renable Options extension installed.
The panel lists your groups under Other design groups. Click Use on the group you want and confirm.
Meta needs Adapt to placement on to fit the shape to each surface, so Renable switches it on for the new version of
the ad when you pin a group. If an ad pinned to a group has it turned off, the panel warns you.
Warnings in the dialog#
| Warning | What it means | What to do |
|---|
| Under a group: a shape the base group has is missing | An ad pinned to the group uses another of its designs instead, which can show letterboxed. If the group covers only one shape, that design shows everywhere. | Click the empty cell and pick a template with the shape, add the size to the group's template in Studio, or accept the gap. |
| On Default designs, for example "default has no Reels design" | Your defaults lack a shape or surface mark another group has. An ad with no pin is matched against all your product images, so Meta can pick another image, possibly from another group. | Add the missing design, or set the surface mark on the design in that cell. |
| On another group, for example "black-friday's Stories mark applies to every ad on the channel" | The group carries a surface mark from an earlier setup or a hand edit, so ads pinned to other groups can show this design on that surface. | Open the design's picker and click the chip to turn it off, or move the surface mark to your default designs. |
Managing a group#
- Rename a group by clicking its name in the grid. Renable asks you to confirm, because an ad pinned on the old name
no longer matches until it's pinned again. Meta documents no fallback; in our testing it showed its own pick.
- Rename a design under Ads pin this design as in its picker. It asks for the same confirmation, for the same
reason.
- Remove one design with Remove design at the bottom of its picker. It leaves the feed on the next publish. An
ad pinned to that design's name no longer matches it, and ads pinned to the group still match its other designs. The
base group's first design can't be removed: it's your main design.
- Delete a group with the trash icon beside its name. Its designs leave the feed on the next publish, and an ad
pinned to it no longer matches it.
- Turn off adaptive designs in the dialog's footer. Your image designs become plain image fields in their current
order, keeping their values. Video designs are removed, and the confirmation lists them first. It flattens every
group, so three groups of three shapes come back as nine image fields. To drop one concept, delete that group instead.
Troubleshooting#
The dialog says adaptive designs isn't switched on for Meta.
Your channel has design blocks but the Adaptive designs chip isn't on, so they won't be recognised as designs. Click
Turn on in the banner.
The panel still shows a flat list of designs, not groups.
The panel reads your published channel. Publish it and give Meta time to fetch the feed. The panel's freshness line
tells you when it last did.
An ad I switched still shows the old design.
Ads Manager's own preview doesn't refresh by itself, so reload the page (the switch dialog offers a one-click reload).
If Meta hasn't fetched your updated feed yet, the ad keeps running its default display until it does, then starts
showing the group on its own.
Where to go next#